If you don't see the solution you need here, it does not mean that we cannot or will not make it.  Just enquire at davidzuvic@orbitalresearch.net or call 1-604-856-0305...
4 BDC Solution
 
 

Click below to contact an

 Orbital Engineer:

Click below to contact an

 Orbital Technical Sales Rep:

Phone: 1-604-856-0305
Contact Engineer Contact Technical Sales Rep Fax: 1-604-856-0315

Up
4 BDC Solution
Redundant Dual Polarity

Add Services to Your Existing System

 

 

Using Orbital Systems Interface Products to bring 4 BDCs, 16 Modem/Receivers and a BUC, under the discipline of a single 10 MHz Oscillator.

The client needed multiple receivers/modems to cover 2 GHz of bandwidth (10.7 - 12.75 GHz). For each polarity, a wide band LNA, a highband BDC, and a lowband BDC were required. System performance required instant acquisition, high stability, and optimal BER, therefore external reference BDCs were needed.  The same high quality conditions were required to be met for the uplink.

Attempting to pass the 10 MHz through the dividers from the modems would have resulted in intermittent loss of lock, poor phase noise, high bit error rate and cycle slip.  Good system design dictates a standalone, high quality, external reference oscillator multiplexing properly with the DC and L band signals.  This design also provides high isolation between modems so that 10 MHz leakage does not impair system performance.  The Orbital Mux Tees provide greater than 92 dB of isolation and less than 0.5 dB insertion loss.  As well, the system is not dependant on a single modem for reference and DC power, and additional modems can be easily added. 

Orbital modular designs permit easy access to each signal port for diagnostics, testing, and system maintenance.  Modularity also permits easy re-configuration, expansion, and replacement at low incremental cost - the benefits of custom design, the low cost of mass production.

 

 

 

 


 

Part Number

Quantity

Pricing (each)

Availability

(for small quantities)

MO-S-5MT25-NNB-2PS18

1-10

$3,575.00 US

Components are in stock, but stack must be assembled.

 

 

Call

Also available in a rack-mount chassis.

PS2-B-18

1-10

included

Two PW2-B-18 power supplies included.

International customers should note that pricing does not include freight, brokerage, local VAT, and customs charges.  Prices from our dealers in your area usually include these amounts.

Power supply extra, see PS1 - Power Supply .  For larger quantities, call for pricing and delivery.  For a further description of included products, see:

MOS - Master Oscillator

SP10 - 10 MHz Splitter

MT40 - Hi Power Mux/Tee

       
       
 
 
Copyright © 2006 Orbital Research Ltd. All rights reserved.
Revised: March 19, 2009