Features:

Please note that just because you do not see a product listed, does not mean that we don't (or won't), make it.  Custom sizes, custom connectors, custom configurations, custom specifications, stack, plate or rack mounting, integrations of SIP components can all be done to order.

Orbital ETT25/40 Extractor Thru Tee

Features:

Specifications

Highpass filtered L band:

            rolloff below 900 MHz, flat 950 through 2100 MHz

            Assures DC block to Rx or Modem port

Filtered 10MHz

Low thru loss from 10MHz input to LNB, BDC or BUC

Lowpass filtered DC:

            2.5 Amp (12 to 24V) capacity standard, 

            4.0 Amp (12 to 48V) optional - for LNBs or transmitters

Any combination of 50W and 75W  in/out Impedance transforms;

            (e.g. 75W J-1 to 50W J-2)

Very low bandpass ripple

Very low L band through loss

Very high Rx port to 10 MHz port isolation, no leakage back to receiver

Superior Input and Output VSWR

Will not degrade phase noise performance

Exceptionally low insertion loss

Functional

Will operate with LNBs, VSATs, BUCs, and Modems

Can be used as a Thru Tee and for DC power extraction from the IFL

Can be used for secondary DC power insertion at the dish

Connectors O ring sealed for weather resistant operation

Will not cause loss of lock 

Will not impair bit error rate 

Can be used with Combining Systems

Structural

Machined from solid aluminum block for strength, stability, and endurance

Allodyne finish for corrosion protection and excellent RF shielding/ grounding

Excellent shielding and grounding

"Back O Rack" mounting bracket for ease of installation and lead dress

Cannon to BNC adapter cable available

Fewer cables and connectors yields less signal degradation

Reduces the mess of cables at the back of the rack

Custom IF amps capable of +17 dBm compression point

Full test documentation available

Provides stability for cables

Lower cost, higher quality with a one-box solution

No labor to source, assemble and test a 'kluge'

Custom design variations welcome

Custom labeling requirements welcome

An Orbital ETT25/40 Extractor Thru Tee works as a Thru Tee - passing L band, 10 MHz reference, and DC power.  It also extracts DC power from the inter-facility link for use at the dish and allows for secondary DC power input.  It performs low-loss impedance transforms, it filters and cleans the L band, DC power and 10 MHz signals.  Many of our clients have taken the trouble to call and comment on just how much the Orbital Mux Tee has improved their system performance.

Made for Professional Use, Made for Satellite:

Orbital Systems Interface Products are made specifically for the satellite industry, and are designed for professional and industrial quality systems.  Orbital SIP products are built for rack mounting, and for use indoors or out.  They are also perfect at the dish or in the rack for creating a test point for live signals - without degrading ongoing operations.

ETT25/40 DC Extractor ThruTee Features

Orbital Research Ltd.                                                                           Sales and Technical Support: 1-(604)-856-0305

14239 Marine Drive, White Rock, BC  V4B 1A9                                                 Sales Fax: 1-(604)-856-0315

Canada                                                                                                        Office Tel: 1-(604)-535-0785  Fax:1-(604)-535-0731

© 2010 Neil Baxter | [ Home ] [ BDCs ] [ Combiners ] [ Pro LNBs ] [ Modified LNBs ] [ SIP ] [ About ] [ Contact ] [ Search ] [ Site Map ] [ Resources ]