|
|
PODM...10MHz Precision
Oscillator Dual Modules 
|
Talk
about the complete package! The PODM will
combine both the horizontal and vertical feeds from
your antenna, and bring them under the discipline of
a single, precise, ovenized oscillator. It will do
this without a mess of cables and 'kluges'. It unites
three orbital
products into one unique package. Nowhere else
can you get a precision, made for satellite oscillator
like the POS-1 combined with a pair of Mux/BiasTees
like the MT-1 Mux/Tee. |
 |
|
The
POS-1 Oscillator has exceptionally low phase noise,
drift and stability, and when
integrated with a filtered multiplexer and bias tee,
it provides the optimum price versus performance
mix. The best one-box, plug and play solution
designed for 'back o rack' mounting. Also
available in a rack-mount configuration.
And now you can combine any two of the following modules into your oscillator package:
DP25/40 - Diplexer
BT25/40 - Bias Tee
RPT - Redundant Power Tee
MT25/40 - Mux/Tee
SP10 -
10 MHz
Splitter |
Precision Oscillator Dual Modules |
|
|
 |
PODM -
Precision Oscillator Dual Modules |
|
PODM-NNBS-BSBS-NNBS |
12.5-19.5 VDC |
2.5 A |
$1480.00 US |
Precision Oscillator Dual Modules
|
|
PODM-NNBS-BSBS-NNBS |
12.5-19.5 VDC |
4.0 A |
$1480.00 US |
|
PODM-NNBS-BSBS-NNBS |
12.5-19.5 VDC |
4.0 A |
$1480.00 US |
|
PODM-NNBS-BSBS-SP10-NNNN |
12.5-19.5 VDC |
4.0 A |
$1480.00 US |
|
|
|
|
|
|
Quantity
Pricing
|
For quantity over 12:
Call: 1-604-856-0305 or
Email:
davidzuvic@orbitalresearch.net
|
|
DP25/40
|
Diplexer -
combines a 10
MHz reference signal and L-Band output into one feed
to an LNB or BUC.
|
|
BT25/40
|
Bias Tee - injects and filters external DC to the LNB while providing exceptional low thru loss with highpass filtering of the L-Band signal
|
|
RPT |
Redundant Power Tee - Bias Tee with two DC inputs for redundant power supplies. |
|
MT25/40 |
Mux / Tee - Combines our standard Bias Tee and 10 MHz Multiplexer. |
|
SP10 |
10 MHz Splitter - integrates a three way
10 MHz Splitter. |
|
|
|
System
Interface Products (SIP), fit between
the Outdoor LNB's or transmitters,
(ODU), and the Indoor receivers and
modems (IDU). |
10 MHz Oscillator
Dual Mux Tee Options
| Connectors available: |
Connector Part Number |
Values |
| J-1, J-2, J-9, J-10: L-Band:
To LNB/BUC & Rx/Modem
|
F
N
S
|
75 ohm F
50 ohm N
50 ohm SMA
|
|
J-4, J5, J6, J12: 10MHz
|
B (Industry Standard)
N
S (recommended for outdoor use)
|
50 ohm BNC
50 ohm N
50 ohm SMA
|
|
J-3, J7, J11: DC Supply
|
B (preferred)
F
N
S
FT
BBi
BP |
BNC
F
N
SMA
Feedthrough
BNC with Binding Post Adapter
BNC with Pigtail Adapter
|
|
Power Supply
Orbital advises that a separate power supply be used for each power input (Oscillator and secondary module) as one power supply for both can cause extraneous signals to be transferred to the Oscillator, that can degrade performance.
If only one power supply is desired by the customer, then Orbital can provide a BNC 'T' adapter for this purpose. Please advise when ordering.
|
|
|
Systems
Interface Products |
|
|
|
|
