|
... to Circumvent a
Divider or Switch
It is possible that you have a modem with
insufficient DC to power a BUC or BUCs.
Here, you can use the Orbital Hi Power
Thru Tee to block the DC from the modem, insert up to 4 amps at up to 48
VDC inside, use a Hi Power Thru Tee in reverse outside to pass the
L-Band and 10 MHz signals outside, while the DC is routed through a
power divider to feed each of the BUCs.
In the case of a switch being used for
the L-Band and 10 MHz signals, power is still provided to each BUC
through the power divider, but only the BUC receiving the 10 MHz
reference will be active.
If the 10 MHz signal cannot handle a 3.5
dB loss from the Divider or switch, then it can be routed around along
with the DC, but then a Mux/Tee is needed for each BUC to reinsert it.
Unless the BUC also has a 10 MHz input connector.
Orbital modular designs permit easy access to
each signal port for diagnostics, testing, and system maintenance.
Modularity also permits easy re-configuration, expansion, and replacement at
low incremental cost - the benefits of custom design, the low cost of mass
production.
Remember that Orbital
Combiners solve the problem of External Reference signals.
|
|
 |
|
Part Number |
Quantity |
Pricing (each) |
Availability
(for
small quantities) |
|
TT40-NNB |
1-10 |
$320.00 US |
Components are in
stock, two required for this solution |
|
TT25-NNB |
1-10 |
$290.00 US |
Components are in
stock, two required for this solution |
|
PS20-B-18 |
1-10 |
$97.00 US |
Not included |
|
PS100-B-18 |
1-10 |
$195.00 US |
Not included |
|
|
|
Power supply
extra, see PS1 - Power Supply
. For
larger quantities, call for pricing and delivery. For a further
description of included products,
see:
[MT40
Mux Tee]
|
|
[10
MHz Splitter] |
|
|
|
|
[Master
Oscillator] |
|
|
|
|
[Power
Supplies] |
|
|
|
|
|
|
|
|
