Jumpers and Cabling: System Interface Products (SIP): Orbital Research Ltd.

Jumpers and Cabling

We do have a selection of high quality jumpers and cables for use with our products.

Samples only are shown here, please contact us or call Tel: 1-604-856-0305

Jumpers and Cabling

PRODUCT SERIES:

Jumpers & Cabling

Overview
Applications
Pricing & ORDER

Click on the images below to see larger version.


SMA Jumper 8 inch JPSS-8	Binding Post Adaptor B2BPA	N Connector Jumper 4 inch JPNN-4

SIP Solutions
Systems Interface Products Although Combiners and Oscillators are also SIP products, we have narrowed the definition here to just include Bias Tees, Diplexers, Mux Tees, TTL Switches, Thru Tees, Dual Power Tees, etc. Here are standard applications for each of these products. Here's how to insert 10 MHz, insert DC, extract 10 MHz, block DC, extract DC, multiplex DC L band and 10 MHz, and perform impedance transforms while you do it.
Using a Hi Power Thru Tee to power a BUC	Modem has DC power, but not enough to power my new BUC.
4 Way Combiner with 10 MHz Oscillator and Hi Power DC insert.	I want to lock several modems to a single 10 MHz Oscillator, and insert high power DC to my BUC.
Orbital 2-way Combiner using 10 MHz from one of the modems and Hi Power Mux/Tee to insert DC power	I have a pair of modems, one of which provides a 10 MHz reference, but I don't have enough power from my modem for my new high power BUC.
Orbital Combiner/Divider stripping out the 10MHz from only one of two modems	I have a pair of modems and I need to use the 10 MHz reference from one of them and split it. I need to take the L-Band signal from both modems and combine it with the 10 MHz reference. Now I need to insert DC power for a pair of high power BUCS.
Orbital Combiner/Divider using a MOS 10 MHz Oscillator	I need to combine the L-Band signals from a pair of modems with an common, external 10 MHz source, and insert power to a pair of high power BUCs.
Using an Orbital Hi Power Thru Tee to circumvent a divider or switch	My modem does not have sufficient DC to power my BUCs, and I can't switch DC power to the BUC, what to do?
Horizontal/Vertical Polarity 1 for 2 Redundant System	We need a system that will provide us with both horizontal and vertical polarities at Ku Band. In addition, the system must offer 1 for 2 redundancy.
More SIP Solutions
Using a Mux Tee	Using an Orbital MT-40 Mux Tee to multiplex the L-Band, and 10 MHz reference signals with DC power for a BUC.
Using a Bias Tee	Using an Orbital MT-40 Mux Tee as a Bias Tee to insert DC Power to a BUC
Using a Diplexer	Using an Orbital MT-40 Mux Tee as a Diplexer to insert a 10 MHz reference to a BUC
Using Redundant Power Tee	Using an Orbital Redundant Power Tee provides inexpensive power supply redundancy.
Using a Thru Tee	Using an Orbital Thru Tee to provide a separate DC power supply to the BUC, while passing the 10 MHz signal through from the modem.

For pricing options please call 1-604-856-0305 or contact us.